Ford Transit Gasoline Ambulance; For global Emergency Medical Services (EMS) operating in severe climates and demanding terrains, fleet specification is a matter of precision. The 2026 Ford Transit Van equipped with the Ambulance Preparation Package stands as the definitive global benchmark for high-performance, high-acuity patient transport. Engineering this platform with the high-output 3.5L EcoBoost® V6 Twin-Turbo Gasoline engine ensures maximum clinical uptime, continuous climate control stability, and rapid highway acceleration.
As an international EN 1789 certified manufacturer, Infinity Chassis Units (ICU) delivers this exact platform fully integrated with advanced intensive care hardware grids. Below is the comprehensive engineering breakdown and medical hardware mapping for the 2026 fleet deployment.
1. Mechanical & Powertrain Performance Blueprint Ford Transit Gasoline Ambulance 3.5L V6
The mechanical core of this Ford Transit variant is architected to sustain extreme electrical and thermal loads during prolonged stationary idling at emergency scenes.
- Engine Type: 3.5L EcoBoost® V6 Twin-Turbo Gasoline (Petrol).
- Horsepower Output: 299 PS (220 kW) according to GSO Conformity certification.
- Torque Rating: 542 Nm available at 2,500 RPM for instant low-end acceleration.
- Transmission: 10-Speed Automatic Transmission for smooth, vibration-free power delivery to safeguard fragile patients.
- Drive Configuration: Rear-Wheel Drive (RWD) with Single Rear Wheels (SRW).
- Selectable Drive Modes: Normal, Eco, Slippery, and Tow/Haul to adapt to fluid road dynamics.
2. Chassis Dimensions & Capacity Framework (L3H3 Configuration)
For Advanced Life Support (ALS) and Intensive Care (ICU) operations, the L3H3 (Long Wheelbase, High Roof) configuration provides the necessary vertical headspace and internal volume for paramedic mobility.
Key Dimensional Metrics
:
- Wheelbase: 3,750 mm (Long Wheelbase – LWB).
- Overall Length: 5,981 mm.
- Overall Width with Mirrors: 2,474 mm.
- Overall Height: 2,780 mm (High Roof variant for full stand-up clearance).
- Load Floor to Roof: 2,069 mm inside the medical compartment.
- Rear Tailgate Entry Height: 1,887 mm for rapid stretcher loading.
- Maximum Payload Capacity: Up to 1,857 kg (T-350 W1X variant) to support heavy armor and full medical arrays.
- Fuel Tank Volume: 95 Liters.
3. Structural Integration: Factory-to-Clinical Conversion
The conversion process begins with the raw, heavy-duty chassis shell supplied directly with Ford’s factory Ambulance Preparation Package. As shown in the official technical specifications file MY26-Transit-Van-Ambulance-EN.pdf, the vehicle is built specifically to support professional medical upfitting.
Referencing the vehicle’s structural layout in image_165479.png, the reinforced unibody design features single sliding side load doors and 50/50 hinged rear doors opening to 253 degrees to facilitate swift clinical access. ICU engineers line this bare interior shell with full thermal-acoustic insulation and seamless, vacuum-formed antibacterial ABS side and ceiling panels, creating an absolute sanitary environment compliant with international clinical standards.
4. Patient Transport ICU-Hardware List (Certified Medical Integration)
To complement the extreme performance of the 3.5L V6 EcoBoost platform, the interior is outfitted with the official ICU Patient Transport Hardware Grid, guaranteeing full resuscitation and monitoring capabilities in transit:
Stretcher & Immobilization Groups
- Main Stretcher: 1 Piece – ICU-AAS-1 (Origin: Türkiye)
- Main Stretcher Locking System: 1 Piece – ICU-AS2 (Origin: Türkiye)
- Main Stretcher Platform: 1 Piece – ICU AASP-1 (Movable special production platform that can be fixed at different points, Origin: Türkiye)
- Main Stretcher Loading Ramp: 1 Piece – ICU-AS5 (Origin: Türkiye)
- Vacuum Stretcher and Pump: 1 Piece – ICU-AVS1 (Origin: Türkiye)
- Combination Stretcher: 1 Piece – ICU-ASS-1 (Origin: Türkiye)
- Inflatable Splint Set: 1 Set (6 pieces) – ICU-SA1 (Origin: Türkiye)
- Neck Collar Set: 1 Set – ICU ABS-1 (Origin: Türkiye)
- Back Board: 1 Piece (With head immobilizer) – ICU-AST1 (Origin: Türkiye)
Advanced Life Support (ALS) Medical Devices
- Automated Transport Ventilator: 1 Piece – COSMOPENT (Origin: Türkiye) – Note: It is a transport type device used in emergency ambulances. Automatic mode feature for baby – child – adult.
- Defibrillation Defenses: 1 Piece – NANOMTEACH AED (Origin: South Korea) – With original mounting kit and bag, equipped with Turkish Mode & English.
- Suction Infrastructure: 1 Piece – A ICU & Medrag Portable Vacuum Aspirator with original mounting kit (Origin: Italy-Türkiye).
- Diagnostic & Monitoring Array:
- Revival Unit: 1 Piece – ICU-CC1 (Origin: Türkiye)
- Glucometer: 1 Piece – plusmed (Origin: Germany)
- Fixed Blood Pressure Device: 1 Piece – Honsun (Origin: PCR)
- Portable Blood Pressure Monitor: 1 Piece – plusmed (Origin: Türkiye)
- Stethoscope: 2 Piece – galena (Origin: Türkiye)
- Diagnostic Set: 1 Piece – Nitra (Origin: Türkiye)
- Thermometer: 1 Piece – Miscellaneous
Disposable Materials
- Oxygen Mask (Adult): 3 Piece – Miscellaneous (Origin: Türkiye)
- Oxygen Mask (Child): 3 Piece – Miscellaneous (Origin: Türkiye)
Fleet Procurement & Direct Global Export Logistics
Infinity Chassis Units operates as a direct B2B vehicle upfitter, leveraging our high-capacity production facility in Ankara, Türkiye and our strategic commercial trade office in Dubai, UAE. We manage the entire timeline—from zero-KM Ford Pro chassis acquisition with factory Ambulance Prep Packages to multi-modal Ro-Ro shipping for government healthcare ministries, NGOs, and defense sectors worldwide.
Request Technical Layout Blueprints for Ford Transit Gasoline Ambulance 3.5L V6
- 📧 Global Sales & Tender Support: sales@infinitychassis.com
- 📞 Ankara Factory (Türkiye): +90 555 104 06 48
- 📞 Dubai Operations Hub (UAE): +90 507 848 06 61
